Industrial valve manufacturer in India
Specialityvalve is the leading Industrial valve manufacturer in India. Industrial valves are devices used to control the flow of liquids, gases, and slurries. The flow of liquids or gases can be conducted using these valves. This can be achieved by opening, shutting, and partially blocking pipes and other channels. Industrial valves are used to control high pressure.
The three common valve purpose include stopping and starting flow, throttling (control) flow, and acting as a non-return check for flow (check).
The industrial valve manufacturing process is a complicated endeavour. It is not just a easy creation of the valve. Industrial Valve Manufacturer in India has many factors that they contribute to its order: raw material procurement, machining, heat treatment, welding, and assembly. Valves should undergo accurate tests to ensure proper functioning before manufacturers hand them over to the customer.
Types of Industrial Valves:
Control valve- is a power operated device used to regulate the flow of fluids such as gas, oil, water, and steam. It is also called as a final control element. It is operated electrically and pneumatically. The valve body is a different type which depends upon service condition, piping layout, and desired application.
Check Valve- is also known as one way valve, which permit the flow of fluids to move in one direction only. The check Valve also helps to stop back flow in the system. It may cause difficulty if the flow is contaminated and therefore contaminates the media upstream. The application of check valves is the protection of upstream equipment, preventing media contamination and it stop from drainage.
Safety Valve- is a pressure relief valve that allows a substance from a boiler, pressure vessel, or another system. Their primary role is safety and is used for boiler overpressure protection, and process operation to prevent product damage due to excess pressure. The prime function is to protect life, the environment, and property against the failure to control system pressures, and last it offers reducing system pressure before total failure
Gate Valve- is a valve that opens by lifting a barrier out of a path of a fluid. It is outline with a fully open or closed service. The operation of a gate valve is performed either clockwise to open or clockwise to close. The gate moves up or down on the weaved part of the stem.
Globe Valve- is also known as a spherical body shape with two halves of the body which are different by an internal baffle. It has an opening that forms a seat onto a movable plug that can be screwed to shut the valve. It is mainly used in situations where the throttling of commodities is required. The globe valve body has a disk and a seat where the disk moves up and down the plane to the seat to let the flow pass.
Butterfly Valve- A Butterfly Valve is a mechanism that control the flow of materials within a large pipe diameter by the quarter-turn of the disc. It is a movement like a butterfly that has wings that move up and down at 90 degrees. It is a metal disc framed on a rod. It is handled when the valve completely blocks the passageway and when it is open, the disc is rotated a quarter turn so that it allows an almost open passage of the fluid
Plug Valve- is a quarter-turn rotary motion manual valve. It provide a straightway passage through the ports so that fluid can flow through the opening plug (cylindrical or tapered plug) with a minimum of turbulence. The plug Valve is different from other valves due to its plug disc design.
Ball Valve- is a shut-off valve that operate the flow of liquid or gas using a rotary ball having a bore. By rotating the ball, a quarter turns 90 degrees around its axis so that the medium can arise through. The ball is organized against two seats and has a shaft that controls the mechanism that rotates the ball.
Available materials: Ductile iron, Monel, WCB, WCC, WC6, LCB, LCC, SS304, SS316, CF8, CF8M, CF3, CF3M, Aluminium Bronze, Bronze, Brass, F55, F53, F51, Inconel, Incoloy, Titanium
Class: 150 to 2500
Nominal Pressure: PN6 to PN450
Size: ½” to 80”
Ends: Flanged, Wafer, Lug, Buttweld, Socket weld, Threaded
Operations: Lever operated, Gear operated, Electric actuated, Pneumatic actuated
