Polyurethane lined pipeline moisturizing method

　　Insulation method of polyurethane lined pipes:

　　In the use of ining pipe, polystyrene boards and extruded plastic boards are generally used together, and the method of bonding anchors is used to carry out thermal insulation construction. Although there are many firmwares used, but after After the test, it was found that adding an average of ф6 plastic anchors per square meter can increase the average heat transfer coefficient of the outer wall by 0.004, so that the heat lost by the thermal bridge components can be increased to construction and production. In the entire process of using polyurethane-lined pipes, there is no need to have any metal anchors and walls to fix it, which can effectively control the thermal conductivity index.

　　Insulation performance of polyurethane lined pipes:

　　The use of lining pipe  has very good thermal insulation performance. Even if the material has a low thermal conductivity, it can still have a good blocking effect, which will not cause heat loss, but For some heat convection heat transfer, there is no way. According to statistics of relevant departments, it is found that 40% of the heat energy loss in the building is lost through some gaps, and the polyurethane lining The pipeline can well block the heat conduction, and the sealing performance is also very good.

　　The performance and insulation method of polyurethane lined pipes are believed to have been understood. For more questions about polyurethane lined pipes, please refer to other content on this site, or call us for details.

https://www.miningscreenmesh.com