Hyndai Veloster N Hood Vent
Goal:
Create a hood vent to expel hot air from under the hood. This will help keep temperatures lower while also creating a small amount of downforce.
Installation:
To install the hood vent, the customer will have to place the vinyl template where they want the hood vent located and then cut the edges following the outline.
After the hood has been cut, the 3M tape that will be on the bottom side of the lip on the vent will be used to adhere it to the car.
The vent will sit mostly inside of the hood, with only the lip and the very top of the vent sticking over the hood.
After the hood has been cut, the 3M tape that will be on the bottom side of the lip on the vent will be used to adhere it to the car.
The vent will sit mostly inside of the hood, with only the lip and the very top of the vent sticking over the hood.
Examples of mounted 3D printed prototype of the hood vent, before it goes to production.
